Siemens TC63 Manual De Usuario
TC63 AT Command Set
10.3 AT^SISO
s
TC63_ATC_V00.490
Page 255 of 501
5/24/05
Confidential / Draft - Do not copy
Parameter Description
0 ... 9 specified with
Internet service state identifier.
""
""
Service profile is unused.
2
Service profile resources are allocated, i.e. at least the service type has been
). The service is
not opened.
3
Connecting: State after opening a service with
where the connection
is being established.
If connection setup is successful the service proceeds to the state "4" (Con-
nected) and one of the URCs "
" and "
" may follow. If connection
setup is not successful, the "
" may appear.
In the case of SMTP, the service will not enter
=3 until the host
has written the first data packet with
.
If the service profile is configured as Socket listener then the listener always
=3 (listening) and
=3 (LISTENER),
of the dynamically assigned ser-
vice profile may change. See examples in Section
.
4
Connected: Socket connection valid.
5
Closing: Socket connection releasing. The Closing state is reached after send-
ing the
as FTP download or POP3. In the latter case, it is necessary to send the
command even though the FTP download or POP3 service has
already entered
"2".
Socket state identifier.
1
1
Socket not assigned, i.e. no TCP/UDP connection active.
2
Socket assigned as CLIENT.
3
Socket assigned as LISTENER.
4
Socket assigned as SERVER.
Number of bytes received via
since last successful
since last successful
write command.
Local IP address in dotted-four-byte format and TCP port, separated by colon, e.g. "192.60.10.10:80".
Remote IP address in dotted-four-byte format or evaluated DNS name and TCP port, separated by colon, e.g.
"192.60.10.10:80" or "www.siemens.com:80".
<srvProfileId>
(num)
<srvState>
(num)
<socketState>
(num)
<rxCount>
(num)
<txCount>
(num)
<locAddr>
(str)
<remAddr>
(str)