SharkRack KVM-8 Manual De Usuario

KVM-8 Installer/User Guide

16

On-Screen Display Operations

17

switch. To exit the OSD window without changing channels, press Esc.
To manually logout when in secure mode, press F10.

Once you have activated the main OSD window, you can open the Command Menu by 

pressing either of the Control keys twice.
The Command Menu options are selected in the same manner as channels in the OSD 

window. Scroll the Highlight Bar up and down and press Enter when your selection 

is highlighted.

If you are operating in non-secure mode or are the system administrator, you will have 

several options that do not appear in the User Level Command Menu: Add Channel, 

Edit Channel, Delete Channel and Administrator Functions are all covered in separate 

sections in this chapter. Scanning is covered in Chapter 6. 
If you experience a loss of mouse signal while using the KVM Switch, select the 

“Reset PS/2 Standard Mse/Kbd” option from this menu for a PC with a standard 

mouse driver or “Reset PS/2 Wheel Mse/Kbd” if you are using a PC with a Microsoft 

IntelliMouse or other wheel mouse driver. This will reset and in most cases restore 

your mouse signal. These commands are equivalent to the <CM>MR<Enter> and 

<CM>MW<Enter> keyboard command listed in the “System Control & Maintenancʼ 

section of this manual.
Choose the option “Version Information” to display on your monitor the current version 

level of your KVM Switch firmware. Press the Esc key to clear this information from 

your screen.