SharkRack KVM-8 Manual De Usuario

KVM-8 Installer/User Guide

18

On-Screen Display Operations

19

Follow the procedures outlined in the table below to change the size, color or position 

of your ID Window.

Move the ID Window

Use the arrow keys or mouse to move the ID 
Window’s position on the monitor. (Hold down 
the Shift key to move faster.) If the window 
flickers but does not move, continue tapping 
the arrow keys until it moves back into range.

Change window

Press the Page Up key to cycle through
background color the available window 
background colors.

Change text color

Press the Page Down key to cycle through 
the available text colors.

Change window length

Use the + and - keys to change the length of 
the ID Window.

Change window size

Press the spacebar to toggle between large 
and small.

ID Window Help

Press F1

5.  Press Enter to accept the changes or press Esc to exit the menu without saving the 

changes.

This menu selection lets you set the time that the ID window remains on screen after a 

channel switch. Each channel can be configured independently. The default time is set 

for five seconds.
1.  Highlight the channel you wish to change in the main OSD window.
2.  From the main OSD window, press the Control key twice to access the 

Administrator Command Menu.

3.  Select “Edit Channel” from the Command Menu.
4.  Choose the option “ID Dwell Time.”
5.  Enter a number between 0-255 seconds. Entering 0 disables the ID window. 

Entering 255 allows the ID window to stay on screen the entire time the channel 

is active.