SBC comm SBC-116 Manual De Usuario

MUTE Function 

Pressing the 

MUTE button turns off the telephones microphone so that the other 

party cannot hear you, but you can hear them. Pressing the 

MUTE button again 

restores connection to the microphone so the other party can again hear you. The 

LCD will display “MUTE” while the function is active.

FLASH Button 

If you subscribe to “Call Waiting” (a special telephone service) the 

FLASH button is 

used to connect the line to another incoming call or to establish a dial tone to make 

another call while still connected to the initial caller.

  Note: If you do not subscribe to Call Waiting, pressing the 

Phone Book Function 

You can store 70 numbers and names in the phone book, refer to the “FUNCTION 

OPERATIONS”, under the “PHONE BOOK” section for details.

HEADSET Function 

To use a headset, connect a headset with a 2.5mm connector into the headset jack. 

To make a call, press the 

HEADSET button. A dial tone will be heard on the headset 

and the phone may be dialed. To end the call, push the 

HEADSET button again.

Volume Function 

The volume level of the handset, headset and speakerphone can be set using the 

volume   and 

 buttons. To adjust, go off-hook with either the handset, headset or 

speakerphone. The LCD will display the volume setting information as it is adjusted.

Ringer Volume Switch 

Set the ringer volume switch to the desired position (HI/LOW/OFF). To have the maximum 

ringer volume, move the ringer volume switch to the HI position. To have a low ringer 

volume, move the ringer volume switch to the LOW position. If you would prefer the ringer 

not to disturb you, move the ringer volume switch to the OFF position.

Pulse/Tone Switch 

Set it to TONE if you have “touch tone dialing”, or set it to PULSE if you have a 

“rotary dial phone”.

   Buttons Function 

Use these buttons to scroll through menu functions, Caller ID, Dialed Calls and Phone book 

records.