Samsung Car Satellite TV System 8000 Manual De Usuario

English

Other Information

Troubleshooting

If the TV seems to have a problem, ﬁrst try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Issues

Solutions and Explanations

Poor picture

First of all, please perform the Picture Test and conﬁrm that your TV is properly displaying the test image.
(go to

- Support - Self Diagnosis - Picture Test) (p. 28)

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as it
did in the store.

Ř If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or

Component cables to deliver HD (high deﬁnition) picture quality.

Ř Cable/Satellite subscribers: Try HD stations from the channel line up.
Ř Antenna connection: Try HD stations after performing Auto program.

✎

Many HD channels are up scaled from SD(Standard Deﬁnition) contents.

Ř Adjust the Cable/Sat box video output resolution to 1080i or 720p.

The picture is distorted: macro block error,
small block, dots, pixelization.

Ř Compression of video contents may cause picture distortion, especially in fast moving pictures such

as sports and action movies.

Ř Low signal level can cause picture distortion. This is not a TV problem.
Ř Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital

TV.

Color is wrong or missing.

Ř If you’re using Component connection, make sure the component cables are connected to the

correct jacks. Incorrect or loose connections may cause color problems or a blank screen.

There is poor color or brightness.

Ř Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness)

(p. 16)

Ř Adjust Energy Saving option in the TV menu (go to

– Picture – Eco Solution –

Energy Saving) (p. 16)

Ř Try resetting the picture to view the default picture settings (go to

- Picture - Picture Reset)

(p. 22)

There is a dotted line on the edge of the
screen.

Ř If the picture size is set to Screen Fit, change it to 16:9 (p. 18).
Ř Change cable/satellite box resolution.

The picture is black and white.

Ř If you are using an AV composite input, connect the video cable (yellow) to the Green jack of

component input 1 on the TV.

When changing channels, the picture
freezes or is distorted or delayed.

Ř If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box

reboots. It may take up to 20 minutes)

Ř Set the output resolution of the cable box to 1080i or 720p.

The 3D Active Glasses may not work
properly if there is any other 3D product
or electronic devices turned on near the
glasses or TV.

Ř If there is a problem, keep other electronic devices as far away as possible from the 3D Active

Glasses.

You may notice a small amount of screen
ﬂickering when watching 3D images in
poor light conditions (from a strobe light,
etc.), or under a ﬂuorescent lamp (50Hz ~
60Hz) or 3 wavelength lamp.

Ř If so, dim the light or turn the lamp off.

The ideal viewing distance should be three
times or more the height of the screen.

Ř We recommend sitting with viewer's eyes on a level with the screen.

If you leave 3D glasses on, battery lifespan
is shortened.

Ř Turn off 3D glasses while not using them.

|j_WWWTuhiu]_TWY^XYhTW]sWZUGGG]X

YWXWTW`TWXGGG㝘㤸GXWa[^aZ^