Rose electronic CrystalView Manual De Usuario

 

CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL

 

CPU cables connect from the Local Unit to a CPUs keyboard, video 
monitor and mouse ports.  The PC and PC-Serial/Audio models use 
a male-to-male cable configured on both ends with an HD15M VGA 
connector and a two MiniDin-6 connectors for the PS/2 keyboard 
and mouse. (Rose Electronics part number CAB-CXV66MMnnn).  
 
The CrystalView MINI model uses a CPU cable with a DB25 
connector on one end and an HD15M VGA connector and two 
MiniDin-6 connectors for the keyboard and mouse. 
(Rose Electronics cable part number CAB-CX0606Cnnn). 
 
The CrystalView SUN model uses a CPU cable with an HD15M and 
a MiniDin-8 connector for the keyboard.   
(Rose Electronics cable part number CAB-C1VS8MMnnn) 
 
Max Local unit to CPU cable length is 20 feet using standard 
cabling. Using coax cabling, this distance can be extended, but care 
should be taken because the Local units power is obtained from the 
connected CPUs keyboard port. 
 

The keyboard, video monitor, and mouse cables on a KVM station 
can connect directly to the CrystalView Remote or Dual Local Units 
connectors if they are a HD15 Video connector and PS/2, MiniDin-6 
Keyboard and Mouse connectors.  
 
CrystalView to Rose switch cable 

To connect a CrystalView Local Unit to a Rose switch such as a 
ServeView, UltraMatrix or UltraView, use Rose cable part number 
CAB-CX0606Cnnn.   
 
Local Unit to Remote Unit cable 

The Local Unit is connected to the Remote Unit with up to 1,000 feet 
of standard CAT-5 UTP/STP “solid core” cable terminated with RJ45 
connectors, 150 feet on the MINI model. Connect this cable to the 
Local and Remote Unit.  Rose Electronics cable part number CAB-
08UTPnnn.