Renault J8S Manual De Usuario

10-36

Remove the intake and exhaust manifolds,

The rods (A), (B) and (C)  are mounted on the cylinder 
block so that they fit into the holes (1, 8, 17) on the 
plate.

After performing an operation on the engine that 
involves disconnecting the oil gallery, it is essential to 
reprime the turbocharger oil circuit, ensuring that the 
following conditions are respected:
– connect the oil return and attach it using a new bolted 

clamp,

– fill up the turbo with engine oil through the inlet 

opening (A),

– run the starter motor to reprime the turbocharger oil 

circuit, until the oil begins to escape from the 
turbocharger inlet opening,

– reconnect the turbocharger inlet pipe,
– run the engine at idle speed so that the circulation of 

oil in the turbocharger is reestablished.

Do not rev the engine to avoid starting the 
turbocharger. If this occurs, the turbo may run by 
inertia without lubrication when the ignition is switched 
off and there is a risk that the turbine shaft will grate.

90749R1