Remington Power Tools 109312-01 Manual De Usuario

7

Unfolding Handlebar
1.  Loosen handlebar adjustment knobs. 

Rotate the handlebar into the operat-
ing position (see Figure 1). Do not 
force handlebar. If there is binding, 
continue to loosen adjustment knobs. 
Be careful not to pinch power cord 
between handlebar and lower handlebar 
support. 

2.  Tighten handlebar adjustment knobs.

Folding Handlebar For Storage
1 

Loosen handlebar adjustment knobs. 
Rotate the handlebar forward and down 
over the tiller housing (see Figure 3). 
Do not force handlebar. If there is 
binding, continue to loosen knobs. Be 
careful not to pinch power cord be-
tween handlebar and lower handlebar 
support.

2 

Tighten handlebar adjustment knobs.

The handlebar has two possible height set-
tings. The tiller is shipped with the handlebar 
mounted in the standard height or lowest 
position. If this height is too short, adjust 
the height of the handlebar to the extended 
height or highest position.

1.  Loosen and remove handlebar adjust-

ment knobs, washers, and saddle bolts 
from handlebar.

2.  Position handlebar so that the bottom 

holes in the handlebar line up with the 
holes in the lower handlebar supports 
(see Figure 2). Insert the saddle bolts 
through the holes and reinstall the 
washers and handlebar knobs.

3.  Tighten handlebar adjustment knobs.

Handlebar

Handlebar 
Adjustment 
Knob

Lower 
Handlebar 
Support

Handlebar

Handlebar 
Adjustment 
Knob

Lower 
Handlebar 
Support

Handlebar 
Adjustment 
Knob

Extended Height 
Adjustment Hole

Standard Height 
Adjustment Hole

Saddle 
Bolt

Washer