Radio Shack Go Vision 16-3255 Manual De Usuario

Other Connections

11

8. Rotate 

 and 

,

located

below the LCD to 

adjust the LCD’s brightness and the DVD player’s 
volume.

9. To stop playing a disc, press 

 

'

.  

• When you stop playing a disc, the DVD player 

remembers where you stopped.

• When you press 

 

J

 to start playing the disc 

again, the player picks up where you left off unless 
you removed the disc or unplugged the DVD player.

10. To turn off the DVD player, press 

on the DVD 

player. The DVD player’s POWER indicator turns off.

To turn off the display, slide 

 to 

. The LCD’s 

POWER indicator turns off.

16*'4"%100'%6+105

You can connect your DVD player to a TV, a TV and Audio/
Video receiver, a camcorder, a game system console, or a 
digital camera.

%

100'%6+0)

"

61

"

#

"68

Position Cables Properly to Avoid Audio 
Interference.

• Insert each cable firmly into the 

designated jack.

• If you place components above the 

TV, route all cables down the side of 
the back of the TV instead of straight 
down the middle of the back of the TV.

• If your antenna uses 300-ohm twin 

lead cables, do not coil the cables. 
Also, keep the twin lead cables away 
from audio/video cables.

1. Connect the supplied Audio/Video 

cable’s yellow plug to the 

 

 jack on the back of the DVD 

player and connect the yellow plug’s 
other end to the TV’s Video Input jack.

2. Connect the supplied Audio/Video 

cable’s red plug to the 

 socket on the rear of the DVD 

player. Connect the red plug’s other 
end to the TV’s Audio Input Right jack.