Planet Technology LCD MONITOR 170S8FS Manual De Usuario

8

9

This  chapter  provides  network  managers  and  system  administrators  with  information 
about how to configure the WMC-1600R via the Management interface. 

The WMC-1600R can be accessible using a terminal or terminal emulator attached to the 
RS-232 serial port.

1.Locate correct DB9 serial port cable with female DB9 connector.

2.Attach the DB9 serial port female cable connector to the male DB9 serial port connector 

on the chassis system.

3.Attach the other end of the DB9 serial port cable to a remote the workstation.

4.By default, the Management Module uses the following serial port parameter values:

Bits per second 

57600

Stop bits 

 

1

Data bits 

 

8

Parity 

 

NONE

Flow Control   

NONE

The default Login name and password is both “root".

The WMC-1600R can be accessible using TELNET through LAN.

1. Run TELNET program.

2. Enter the IP address "

192.168.1.1

" (the factory-default IP address setting).

3. The default Login name and password is both "root".