Philips HD8745/47 Manual De Usuario

12

 Insert the plug of the other end of the power cord into a wall socket 

with suitable power voltage.

 Make sure the control dial is on the “ ” position.

 Press the ON/OFF button to turn the machine on; the “ “ light will 

begin to fl ash quickly indicating that the circuit has to be primed.

When using the machine for the fi rst time, the following activities need to 

happen:

1)  You need to prime the circuit.

2)   The machine will perform an automatic rinse/self-cleaning cycle.

3)  You need to initiate a manual rinse cycle.

During this process fresh water fl ows through the internal circuit of the 

machine and the machine warms up. This takes a few seconds.

 Place a container (1L) under the hot water/steam wand or Pannarello 

(if supplied).