Tyco Electronics M/A-Com P5300 Manual De Usuario

35 

 

 

The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the 
radio (see Figure 8-2).  In OpenSky mode only two radio states are reflected by the LED and the status 
they represent are:  

Green:  

Receiving 

Red:  

Transmitting 

 

If the LED is flashing rapidly, the radio is receiving an emergency call.  If the 
LED is flashing every ½ second, the selected talk group is in the emergency state 
(although not transmitting).  If the selected talk group is in the emergency state, 
an asterisk will be displayed next to the talk group name. 

Login occurs either automatically (auto registration) if the radio has a valid registration or, if enabled, 
requires the user to enter a User ID and password. 

The user will be prompted to “Pls Login” with the *1 login command, a User ID, and password. 

1.  Press *1, 

 

 keys (Login command). 

2.  Enter the full 10-digit User ID. 

3.  Press the 

 key. 

4.  Enter the password.  

•  If the radio is configured for alpha-numeric passwords and the password has consecutive 

duplicate numbers (“MES33” for example), enter #, the 

 key, between the consecutive 

duplicate numbers so the radio will not interpret the entry as a letter (“D” in this example). 

•  If the radio is configured for numeric-only passwords, do not press the 

 key between 

duplicated numbers. 

5.  Press the 

 key twice. 

The User ID may be remembered from the previous log-in. (Refer to Section 8.5 for further details 
regarding log-off commands.) The password will be established before the radio is put into operation. 
Contact the local OpenSky network administrator for more information.