Tyco Electronics M/A-Com P5300 Manual De Usuario

58 

Status Icons indicate the various operating characteristics of the radio. The icons show operating modes 
and conditions and appear on the third line of the display (see Table 9-2). 

 

Steady – “Busy” transmitting or receiving.  Appears in the 2

nd

 position of the display. 

Flashing – call queued 

 

Steady – special call mode (individual or telephone).  Appears in the 11

th

 position of the 

display. 

 

Steady – during all radio transmissions.  Appears in the 1

st

 position of the display 

 

Steady – transmit at low power.  Appears in the 5th position of the display. 

If icon is not visible – transmit at high power 

 

Steady – battery charge indicator.  Appears in the 12th position of the display. 

 

Flashing – Low battery indicator. 

 

Steady – Indicates the current channel is set up as an analog channel.  Appears in the 7th 
position of the display. 

 

Steady – trunked system in Failsoft

™

 mode.  Appears in the 4th position of the display. 

 

Steady – group or channel in scan list.  Appears in the 10th position of the display. 

 

Steady – priority 2 group or channel.  Appears in the 10th position of the display. 

 

Steady – priority 1 group or channel. Appears in the 10th position of the display. 

 

Steady (rotates clockwise) – scan mode enabled. Appears in the 9th position of the display. 

If icon is not visible – scan is disabled 

 

Steady – transmit in encrypt mode.  Appears in the 6th position of the display. 

Flashing – receiving an encrypted call 

 

Steady – Indicates the current channel is set up as a ProVoice or Aegis channel. Appears in 
the 7th position of the display. 

 

The battery charge indicators illustrate approximate level only, based on battery voltage.  Refer to Figure 
9-4.