Tyco Electronics M/A-Com P5300 Manual De Usuario

62 

Example:  

System: 1 = North 

Group:  1 = Group 1 

 

2 = South 

 

2 = Group 2 

 

3 = East 

 

3 = Group 3 

 

4 = West 

 

4 = Group 4  

1.  Press 

. (South is the currently selected system.)  

2.  Press 

. (Press 4 to select “West” system.) 

3.  Press 

. (West is the newly selected system.) 

Several methods can be used to select a new group or channel.  

METHOD 1:  

From the control knob: If group selection is programmed to the Voice group selection 
knob, select a group by turning the Voice group selection knob to the desired group 
number position. The display registers the new group name on line two. If the knob is
moved to a position greater than the number of programmed groups, the highest
programmed group will remain selected. The 

button can be programmed to provide 

access to a “2

nd 

bank” of 16 group number positions (17-32). 

METHOD 2:  

From keypad: If group selection is programmed as the primary function of 

 and

 

select a group by pressing 

 or

 

to scroll through the group list. The display 

registers the new group name on line two.  

METHOD 3:  

(P5370 model radios only) Direct Access: Press 

  to enter the group select mode. 

Press the numeric key mapped to the desired group. Press 

. The radio will move to 

the selected group.  

1.  Press 

 to toggle scan OFF and verify   is not displayed. 

2.  Select group or channel. 

3.  Press 

 once to remove group or channel from list. 

4.  Press 

 once to add as a normal group or channel. 

5.  Press 

 twice to add as a Priority 2 group. 

6.  Press 

 three times to add as a Priority 1 group. 

7.  Press 

 to re-start scanning. 

1.  Press 

 to toggle scan OFF and verify   is not displayed. 

2.  Select group or channel. 

3.  Press 

 once to remove group or channel from the list. 

4.  Press 

 once to add as a normal group or channel.