Tyco Electronics M/A-Com P5300 Manual De Usuario

74 

1.  To select a pre-stored individual phone number, enter the individual call mode using the 

 key.   is 

displayed. Then scroll through the list of stored numbers using the 

 or

 

keys.  

2.  Press the PTT button; when the radio is clear to transmit,   turns ON,   turns OFF and the channel 

access tone sounds. Line one shows the called individual's name if found in the list of stored 
individuals or LID followed by the logical ID number of the unit being called. The message 

*INDV*

 

displays on line two. 

1.  To select a pre-stored individual number, enter the menu mode by pressing the 

 key. Scroll 

through the mode list using the 

 or

 

buttons.  

2.  Press 

.   is displayed. Scroll through the list of stored phone numbers using the 

 or

 

buttons until the desired number is displayed. Press 

. 

3.  Press the PTT button; when the radio is clear to transmit   turns ON,   turns OFF and the channel 

access tone sounds. Line one shows the called individual's name or LID. The message 

*INDV*

 

displays on line two. 

1.  The following procedure describes how to initiate and complete a Direct Dial Individual Call. 

2.  The individual call ID is not stored in the pre-stored list of call IDs but the individual unit ID is 

known, it can be entered directly from the keypad. 

3.  Press and hold the PTT button to transmit.   will turn ON, 

 will turn OFF, and the channel access 

tone will sound. Line one shows the called individual's ID followed by the logical ID number of the 
unit being called. The message 

*INDV*

 displays on line two. Proceed talking into the microphone. 

There are two lists available for call storage in the P5300 series radios, the calls received list (1 - 10) and 
the personality list (1 - 99 as defined by the user). When the individual call mode is entered by pressing 

, the calls received list is available. The user can toggle to the personality list by selecting any index 

other than 0 or toggle between the two lists by pressing the 

 key. If wrap is enabled, the calls received 

list wraps on itself and not into the other list.