Tyco Electronics M/A-Com P5300 Manual De Usuario

90 

3.  Adjust the POWER ON-OFF/VOLUME knob to the desired volume level.  

4.  Select the desired system and group. The display indicates the current system and group names.  

5.  The radio is now ready to transmit and receive calls. 

METHOD 1:  

From the control knob: If system selection is programmed to the 
SYSTEM/GROUP/CHANNEL SELECTION control knob, select a system by turning
the knob to the desired system number position (1-16). The display registers the new 
system name on line one. The   button can be programmed to provide access to a “2

nd 

bank” of 16 system number positions (17-32). 

METHOD 2:  

From the keypad: If system selection is programmed as the primary function of 
and

 

, select a system by pressing 

 or

 

 to scroll through the system list. The 

display registers the new system name on line one.  

METHOD 3:  

(P5370 model radios only) Direct Access: Press 

 to enter the system select mode. 

Press the numeric key, which is mapped to the desired system. Press 

. The radio 

will move to the selected system.  

 

 

If system selection is programmed to the Voice group selection knob, direct access to 
systems will not be available. Pressing 

 or

 

 will scroll through different sets of 

16 systems each (banks) if more than 16 systems are programmed into the radio. The 
systems within each bank are then selectable via the Voice group selection knob as 
described previously in METHOD 1. 

Example:  

System: 1 = North 

Group:  1 = Group 1 

 

2 = South 

 

2 = Group 2 

 

3 = East 

 

3 = Group 3 

 

4 = West 

 

4 = Group 4  

Press 

. (South is the currently selected system.)  

Press 

. (Press 4 to select “West” system.) 

Press 

. (West is the newly selected system.) 

Several methods can be used to select a new group or channel.  
 

METHOD 1:  

From the control knob: If group selection is programmed to the Voice Group Selection 
knob, select a group by turning the Voice Group Selection knob to the desired group 
number position. The display registers the new group name on line two. If the knob is 
moved to a position greater than the number of programmed groups, the highest
programmed group will remain selected. The   button can be programmed to provide 
access to a “2

nd 

bank” of 16 group number positions (17-32) 

METHOD 2:  

From the keypad: If group selection is programmed as the primary function of 

 and

 select a group by pressing 

 or

 

 to scroll through the group list. The display 

registers the new group name on line two.