Samsung WM-202 Manual De Usuario

The brightness of the display can be adjusted for when the radio is in 
Stand-by and for when it is in use. If you use the unit in the bedroom, you 
may prefer a lower stand-by brightness level than the standard setting. 
There are three brightness levels and an off setting.

1.   Press the On/Off button to switch on your radio. Access the menu for 

the current mode by pressing the Menu button. 

2.   Rotate the Tuning/Select control until 'System settings' is highlighted 

on the display. Press the control to enter the system settings menu.

 Rotate 

the 

Tuning/Select control until 'Brightness' is highlighted on 

the display. Press the control.

3.  To adjust the display brightness when the radio is switched on rotate 

the Tuning/Select control until 'Active' is highlighted on the display. 

 

To adjust the display brightness when the radio is in stand-by rotate 
the Tuning/Select control until 'Standby' is highlighted. 

 

Press the control to enter the selected brightness adjustment mode.

4.  To adjust the brightness level rotate the Tuning/Select control clockwise 

to increase the brightness level and anti-clockwise to decrease it. 

 

The backlight level will change as the control is rotated so that you can 
see the effect of each setting. Note that the backlight is completely off 
at the zero setting. Press the control to confi rm the setting.

 Press 

the 

Menu button to exit.

When the radio is in Stand-by mode, pressing a button or turning the rotary 
control will cause the radio to switch to the Active brightness level for a few 
seconds. If the Stand-by brightness level is set to zero (backlight off), it is 
still possible to see the time at night by quickly pressing a button.

2-4

1,4