Fantec DB-R35DUS-1 Manual De Usuario
RAID Jumper Setting:
None RAID
(Single Mode)
1
4
2
5
3
6
RAID0
Spanning
1
4
2
5
3
6
RAID0
Stripping
1
4
2
5
3
6
RAID1
Mirroring
1
4
2
5
3
6
1.
When both HDD insert at the same time under RAID mode all data will be
formatted.
2.
For the first time usage, please install one main source HDD and power “on”
DB-R35DUS. Wait until “error” indicator on the second HDD lights on, system had
set first HDD to Main HDD then power “off” DB-R35DUS. Please install second
HDD and power “on” again. System will automatically “rebuild” data to second
target HDD. (If both HDDs are new with no data, then both HDDs can install at the
same time.)
DB-R35DUS. Wait until “error” indicator on the second HDD lights on, system had
set first HDD to Main HDD then power “off” DB-R35DUS. Please install second
HDD and power “on” again. System will automatically “rebuild” data to second
target HDD. (If both HDDs are new with no data, then both HDDs can install at the
same time.)
3.
Both HDDs have to be the same brand and model number when using “RAID
function”.
function”.
4.
When changing usage mode (Single Mode, RAID0 Mode or RAID1 Mode) will
require re-format the HDDs. Make sure back-up all data before doing so.
require re-format the HDDs. Make sure back-up all data before doing so.