Trilogy Touch Technology Trilogy Commander Digital Intercom 9 Manual De Usuario

 

If the system is multi-frame (i.e. > 96 ports), it will be supplied with frame 1 at the bottom and 
frames 2,3,4 etc. ascending from there. Some earlier systems were supplied with the frames 
configured in descending order.  

The system modules will normally be packed separately for transit.  Carefully remove all of 
the packing materials taking care to leave the modules in their anti-static protection for as 
long as possible. 

Module variants are indicated by the type suffix, e.g. 500-06-00. In general, there is 
complete backward compatibility between all versions of the modules. Modules supplied as 
part of a complete system are compatible and will have been system checked accordingly.  

Identify the modules and fit them into the frame in the following order: 

1.  500-08 Changeover Module. See section 2.4.1. 

2.  500-02 Talkback Controller (main controller only) See section 2.4.2. 

3.  500-01 TDM Controller (main controller only). See section 2.4.3. 

4.  Optional 500-10 Misc. I/O (GPI) Modules. See section 2.4.5. 

5.  Optional 500-25 Network Cards. See section 2.4.4. 

6.  500-06 Matrix Cards. See section 2.4.6. 

The diagram below shows the correct location within each frame. 

 

Matrix Cards 

Main TDM Controller 

Main Talkback Controller 

Standby Talkback Controller

Standby TDM Controller

Matrix Cards 3 - 15 

Changeover Module