P3 International Professional Weather Station E 9300 Manual De Usuario
13
All the settings required for the weather
station to operate normally have now been
made. The expanded settings are not needed
for normal operation.
station to operate normally have now been
made. The expanded settings are not needed
for normal operation.
Press the "EXIT" key to leave configuration
mode and return to normal mode.
mode and return to normal mode.
Press the "NEXT" key in order to make
expanded settings and to calibrate the rain
sensor.
expanded settings and to calibrate the rain
sensor.
Entering the rain sensor calibration
value
value
The rainfall measuring system is delivered from
the factory with high accuracy, so that
normally no calibration is required. Please
only make adjustments if necessary.
the factory with high accuracy, so that
normally no calibration is required. Please
only make adjustments if necessary.
The calibration value must initially be
determined in normal mode as described
under 7.2.
determined in normal mode as described
under 7.2.
Enter the previously calculated calibration
value using the "+" and "-" keys.
value using the "+" and "-" keys.
Press "NEXT" to proceed to inputting the unit
of rainfall measurement.
of rainfall measurement.
Setting the unit for rainfall
measurement
measurement
The unit for the rainfall is indicated in the
"RAIN" field and can be expressed as l/m
"RAIN" field and can be expressed as l/m
2
mm, or inches.
Select the desired unit using the "+" and "-"
keys.
Press "NEXT" to get to the input function
for the indicator path.
keys.
Press "NEXT" to get to the input function
for the indicator path.
EXIT
+
Calibration
value
–
NEXT
Quit
configuration
or
NEXT
Expanded
settings
+
Unit for
rainfall
–
NEXT