Toro EC-XTRA Landscape Timer, 6-Zone (53794) Guía De Instalación

About the Watering Program Memory
Once programmed, the ECXTRA memory will be 

retained for several years without power. Only the cur-

rent time and date information will be lost and will need 

to be reset if power is disconnected from the timer for 

more than 24 hours. 

The ECXTRA has a permanent (default) watering sched-

ule that can operate your sprinkler system automatically 

when power is first applied.

The default watering schedule operates as follows: 
• Program A has a Calendar watering schedule set to 

water every day. 

• One program start time is set for 5:00 

am

 (5:00). 

• A run time of 10 minutes is set for each zone and the 

pump start/master circuit will be turned on. 

• Programs B and C are turned Off (no watering program 

settings).

• Master Valve/Pump Start circuit On/Off is On.
• Season Adjust is 100%
• Pump Delay time is 0 (zero).
If you do not wish to program the timer, you can use 
the default watering schedule as is. With the  
current time and date set, your ECXTRA will be ready 
to operate automatically. 
Note:

 The watering program memory can be reset to the 

default program at any time. See “Clearing the Program 

Memory” on page 36 for detailed information

 

Turn the control dial to the 

position (the hour digits will begin flashing).

 The time of day will be displayed in hours and 

minutes (12-hour format). To select a 24-hour format, 

press the next button repeatedly to display 12 H. Press 

the +/

 button to display 24 H. Press the next button 

once (the hour digits will begin flashing).

  To adjust the display, press the +/

 button to scroll 

the digits forward or the –/

button to scroll the dig-

its backward. 

 The display will begin to change rapidly if either  

button is held down for more than two seconds. 

  Press the 

 button to select the next portion of 

the display.

  Repeat steps and to set the following current 

information: minutes, year, month and day. 

  When the current time and day are displayed, return 

the control dial to the

position. 

Day

Month