Toro Precision Series Spray Nozzles Hoja De Datos Del Producto

The Precision

™

 Spray nozzles 1”/

hr. precipitation rate ensures that water is applied more slowly 

and evenly without sacrificing landscape health. These nozzles 

are available in a wide selection of arcs and radii, as well as male 

and female threads, making them ideal for large scale installations 

and retrofits. The Precision

™

 Series Spray Nozzles are now also 

available in pressure-compensating versions, further enhancing 

the best-in-class spray nozzle in the industry.

Using patented H²0 chip technology – and no moving parts – each 

Precision Series Spray nozzles creates one or more high frequency oscillating streams to 

achieve the desired arc and radius with 1/3 less water usage.

Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate, 

which better matches soil infiltration rate. This lower precipitation rate, along with high 

distribution uniformity make this nozzles family the most 

efficient nozzle from 5’-15’ (1,5-4,6m).

Pressure-Compensating Precision

™

 Series Spray Nozzles maintain 1”/hr (25mm/hr.) 

precipitation rate and minimizes misting up to inlet pressures to more than 40 PSI, 

minimizing the need for a regulating head, at fraction of the cost.

The lower flow rate of Precision Series spray nozzles maximizes design 

efficiency and saves on overall material costs by using fewer valves and less 

controller stations. In addition, existing systems with low pressure can be fixed with 

a simple retrofit of the existing high-flow nozzle.

Precision

™

 Series Spray nozzles (non-Pressure-Compensating versions only) have 

been tested and validated in the field and at the Center for Irrigation Technology (CIT). 

The elastomeric PCD disk opens and closes 

in response to changes in inlet pressure 

to maintain optimal performance, even 

when the pressure rises higher than 40 psi. 

The Pressure-Compensating versions are 

indicated by the red stamped Toro logo, 

while the non-Pressure-Compensated 

versions are indicated by the white 

stamped Toro logo.

Assures no variation at the end of the water 

arc for better edge definition and consistent, 

reliable performance.