Toshiba 19DL502B Manual De Propietario
English - 19 -
English
Initial Installation
Before switching on the TV, put your decoder and media recorder to Standby if they are connected and
ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as
detailed on page 13.
IMPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the fi rst time installation.
a Common Interface module is not inserted before
switching on the TV for the fi rst time installation.
Connect the mains plug and switch the TV to on
1.
using the side control switch. If the TV does not
switch on, press any numbered or button on
the remote control, then the language selection
menu will be displayed. This screen will appear
the fi rst time that the TV is switched on and each
time the TV is reset.
switch on, press any numbered or button on
the remote control, then the language selection
menu will be displayed. This screen will appear
the fi rst time that the TV is switched on and each
time the TV is reset.
By pressing
2. Up or Down button, highlight the
language you want to set and press OK button.
The following message will be displayed next:
The following message will be displayed next:
By pressing
3. Left or Right button, select the
country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
When set,
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
When set,
4. Down buton to select Teletext
Language. Use Left or Right button to select
desired Teletext Language.
Press
desired Teletext Language.
Press
5. Down button after setting Teletext Language
option. Scan Encrypted Channels will be then
highlighted. You can set Scan Encrypted
Channels as Yes if you want to scan coded
stations.
highlighted. You can set Scan Encrypted
Channels as Yes if you want to scan coded
stations.
Press
6. OK button on the remote control to continue
and the following message will be displayed on
the screen:
the screen:
Select
7. Yes button by using Left or Right button
and press OK button to continue.
The Auto tuning screen will appear and the
The Auto tuning screen will appear and the
8.
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
The following OSD will be displayed on the screen
and the television will search for the selected
broadcasts:
The progress bar will move along the line. You
must allow the television to complete the search.
The following OSD will be displayed on the screen
and the television will search for the selected
broadcasts:
Note: You can press MENU button to cancel.
After the available stations are stored, Channel List
•
will be displayed on the screen. If you like the sort
channels, according to the LCN, please select Yes
and then press OK button (if available).
channels, according to the LCN, please select Yes
and then press OK button (if available).
Press
•
OK button to quit channel list and watch TV.
Note:
Do not turn off the TV while initializing fi rst time
installation.
Do not turn off the TV while initializing fi rst time
installation.
19DL502B_MB62_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1910UK)_10075891.indd 19
19DL502B_MB62_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1910UK)_10075891.indd 19
21.01.2012 17:51:24
21.01.2012 17:51:24