Thomas & Betts 9395 Manual De Usuario

 
 

UPS 225 - 275 kVA  

User’s and Installation Guide

1027212 

Revision B

2

To install wiring to connections:

1.   If using a Powerware battery cabinet, proceed to Step 2; otherwise, proceed to Step 5.

2.   Route and connect the battery cables between the UPS and battery cabinets in accordance 

with the instructions in the Powerware 9395 Integrated Battery Cabinet (Model IBC-L) 
installation manual. See Figure 3-3 through Figure 3-5 for wiring access information and 
terminal locations.

3.   Connect the positive, negative, and ground DC power wiring from the battery cabinet to the 

UPS cabinet battery and ground terminals. See paragraph 2.2.2 on page 14 for wiring and 
termination requirements.

4.   Proceed to Step 7.

5.   Route and connect the battery cables between the UPS and the battery system. See Figure 

3-3 through Figure 3-5 for wiring access information and terminal locations.

6.   Connect the positive, negative, and ground DC power wiring from the battery system to the 

UPS cabinet battery and ground terminals. See paragraph 2.2.2 on page 14 for wiring and 
termination requirements.

7.   After wiring the UPS system to the facility power and critical load, be sure to ground the 

system according to local and/or national electrical wiring codes.

8.   If wiring interface connections, proceed to paragraph 3.5; otherwise, proceed to Step 9.

9.   When all wiring is complete, reinstall the left front panel removed in paragraph 3.4.1 and 

secure with the retained hardware.