Teledyne Tablet Accessory T803 Manual De Usuario

 

 

This section provides information needed when using external digital and serial 
I/O for remote operation. It assumes that the electrical connections have been 
made as described in Section 3.3.1.  

Your analyzer can be remotely configured, calibrated or queried for stored data 
through the serial ports, via either Computer mode (using a personal computer) 
or Interactive mode (using a terminal emulation program). 

8.1. COMPUTER MODE 

Computer Mode is used when the analyzer is connected to a computer with a 
dedicated interface program such as APICOM. 

8.1.1. REMOTE CONTROL VIA APICOM 

APICOM is an easy-to-use, yet powerful interface program that allows the user to 
access and control any of Teledyne API’s main line of ambient and stack-gas 
instruments from a remote connection through direct cable, modem or Ethernet.  
Running APICOM, a user can: 

  Establish a link from a remote location to the T803 through direct cable 

connection via RS-232 modem or Ethernet. 

  View the instrument’s front panel and remotely access all functions that could 

be accessed when standing in front of the instrument. 

  Remotely edit system parameters and set points. 
  Download, view, graph and save data for predictive diagnostics or data 

analysis. 

  Check on system parameters for trouble-shooting and quality control. 

APICOM is very helpful for initial setup, data analysis, maintenance, and 
troubleshooting.  Figure 7-2 shows examples of APICOM’s main interface, 
which emulates the look and functionality of the instruments actual front panel. 
APICOM is included free of cost with the analyzer and the latest versions can 
also be downloaded at 

http://www.teledyne-api.com/software/

. 

07276B DCN6418