Teledyne Tablet Accessory T803 Manual De Usuario
Teledyne API T803 CO2/O2 Analyzer Operation Manual
Introduction, Featueres, and Options
19
Option
Option
Number
Description/Notes Reference
Carrying Strap/Handle
Side-mounted strap for hand-carrying analyzer
29
Extends from “flat” position to accommodate hand for carrying.
Recesses to 9mm (3/8”) dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
Recesses to 9mm (3/8”) dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
N/A
CAUTION - GENERAL SAFETY HAZARD
THE T803 WEIGHS ABOUT 28 POUNDS (12.7 KG). TAKE CARE TO
AVOID PERSONAL INJURY WHEN LIFTING/CARRYING THE
ANALYZER.
AVOID PERSONAL INJURY WHEN LIFTING/CARRYING THE
ANALYZER.
ALSO, DISCONNECT ALL CABLES AND TUBING FROM THE
ANALYZER BEFORE MOVING IT.
ANALYZER BEFORE MOVING IT.
Analog Inputs w/USB port
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
meteorological instruments).
64B
Also can be used for logging these signals in the analyzer’s internal
DAS. (See Option 64A for USB port only).
DAS. (See Option 64A for USB port only).
Current Loop Analog
Outputs
Outputs
Adds isolated voltage-to-current conversion circuitry to the analyzer’s analog
outputs.
outputs.
41
Can be configured for 0-20 mA or 4-20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Section 3.3.1.4
Parts Kits
Spare parts and expendables
42A
Expendables Kit for analyzer with a pump, includes a recommended
set of expendables for one year of operation.
set of expendables for one year of operation.
Appendix B
42D
Expendables Kit for analyzer without a pump, includes a
recommended set of expendables for one year of operation.
recommended set of expendables for one year of operation.
Appendix B
Communication Cables
For remote serial, network and Internet communication with the analyzer.
Type
Description
60A
RS-232
Shielded, straight-through DB-9F to DB-25M cable, about
1.8 m long. Used to interface with older computers or
code activated switches with DB-25 serial connectors.
1.8 m long. Used to interface with older computers or
code activated switches with DB-25 serial connectors.
60B
RS-232
Shielded, straight-through DB-9F to DB-9F cable of about
1.8 m length.
1.8 m length.
60C
Ethernet
Patch cable, 2 meters long, used for Internet and LAN
communications.
communications.
60D
USB
Cable for direct connection between instrument (rear
panel USB port) and personal computer.
panel USB port) and personal computer.
Concentration Alarm Relay Issues warning when gas concentration exceeds limits set by user.
61
Four (4) “dry contact” relays on the rear panel of the instrument. This
relay option is different from and in addition to the “Contact Closures”
that come standard on all TAPI instruments.
relay option is different from and in addition to the “Contact Closures”
that come standard on all TAPI instruments.
Section 3.3.1.7
RS-232 Multidrop
Enables communications between host computer and up to eight analyzers.
62
Multidrop card seated on the analyzer’s CPU card.
Each instrument in the multidrop network requires this card and a
communications cable (Option 60B).
Each instrument in the multidrop network requires this card and a
communications cable (Option 60B).
Section 3.3.1.8
07276B DCN6418