Tektronix Webcam 070-8030-01 Manual De Usuario
Adjustment Procedures
5–6
1780R-Series Service Manual
Table 5–1: Recommended Equipment (Cont.)
Electrical Instrument
Example
Performance Requirements
Auxiliary Equipment
14. 75
W Terminators
Five required, three must be a feed-
through type.
through type.
Two 75
W End-line Terminators (Tektronix
Part No. 011-0102-00).
Three Precision (0.2%) 75
W Feed-
through Terminators (Tektronix Part No.
011-0103-02).
011-0103-02).
15. 75
W Coaxial Cables
Three 42 inch cables, with BNC connec-
tors are required.
tors are required.
RG 59U (Tektronix Part No. 012-0159-00)
16. Dual Input Coupler
Matched BNC cable-T for matching input
gains. Length of arms matched to within
gains. Length of arms matched to within
±
0.1 in.
Tektronix Part No. 067-0525-02.
17. 75
W 10X Attenuator
Tektronix Part No. 011-0061-00.
18. X Y Input Connector
Fifteen-pin, subminiature D-type connec-
tor modified to input the audio signal for X
Y checks and adjustments. See Figure
5–4.
tor modified to input the audio signal for X
Y checks and adjustments. See Figure
5–4.
Tektronix Part No. 131-0459-00.
19. Board Extender Bracket
Bracket includes cable extenders to allow
access to the Oscillator circuit board (A7)
adjustments.
access to the Oscillator circuit board (A7)
adjustments.
Tektronix Part No. 016-1011-00.
20. 20 pF Input Normalizer
Tektronix Part No. 067-0538-00.
21. BNC T Connector
Tektronix Part No. 103-0030-00.
22. BNC Elbow Connector
Tektronix Part No. 103-0031-00.
23. Alligator Clip to BNC Adapter
Female BNC connector to Alligator clip
leads. Used with Parade Display Test
Connector. (See item 24.)
leads. Used with Parade Display Test
Connector. (See item 24.)
Tektronix Part No. 013-0076-00.
24. Parade Display Test Connector
Remote connector modified to enable
and test the RGB parade input. See
Figure 5–5.
and test the RGB parade input. See
Figure 5–5.