Technicolor DVD Player + TV Set + VCR Manual De Usuario
Player Menus
33
EN
DVD
The Audio menu
You can adapt your player to other equipment and access
specific functions with the Audio menu.
specific functions with the Audio menu.
1.
Select the Audio
option in the main menu using
the
and
buttons and press
button to access
the submenu.
2.
Select one of the options using the
and
buttons, and press
button to access the various
options.
Dolby Digital / DTS / MPEG (DVD and DivX)
Select an option using the
and
buttons and press
OK
to confirm:
Bitstream:
Select this option if you connect the DVD Player’s DIGITAL
OUT socket to an amplifier or other equipment with a
Dolby Digital, DTS or MPEG decoder.
OUT socket to an amplifier or other equipment with a
Dolby Digital, DTS or MPEG decoder.
PCM (for Dolby Digital / MPEG):
Select this option when connected to a two-channel digital
stereo amplifier. DVDs encoded in Dolby Digital or MPEG
will be automatically downmixed to two-channel PCM audio.
stereo amplifier. DVDs encoded in Dolby Digital or MPEG
will be automatically downmixed to two-channel PCM audio.
Off (for DTS):
If you select Off, the DTS signal is not output through the
DIGITAL OUT jack.
DIGITAL OUT jack.
Notes:
DTS is a digital sound compression technique developed by Digital Theater Sound Systems for digital
multichannel audio signals. “DTS” and “DTS Digital Out” are trademarks registered by Digital Theater Systems Inc.
Dolby and the double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Dolby Digital is a sound compression technique developed by Dolby Laboratories for digital audio multichannel
signals.The Dolby Digital system supports any audio channel configuration, from stereo sound (2 channels) up
to the digital “surround” sound 5.1.
signals.The Dolby Digital system supports any audio channel configuration, from stereo sound (2 channels) up
to the digital “surround” sound 5.1.
Sample Frequency (DVD)
Select an option using the
and
buttons and press
OK
to confirm:
48kHz:
Select this option if your receiver or amplifier is not capable of handling 96 kHz
signals. In that case, the player automatically converts any 96 kHz signals to 48 kHz so
your system can decode them.
signals. In that case, the player automatically converts any 96 kHz signals to 48 kHz so
your system can decode them.
96kHz:
Select this option if your receiver or amplifier is capable of handling 96 kHz signals.
Note: Check the documentation of your amplifier to verify its capabilities.
DRC (Dynamic Range Control) (DVD and DivX)
Compressing the dynamic range of the audio output (the difference between the loudest sounds and
the quietest ones) allows you to listen to a movie at a lower volume without losing clarity of sound.
the quietest ones) allows you to listen to a movie at a lower volume without losing clarity of sound.
Select On using the
and
buttons to enable the DRC option and press
OK
to confirm.
Vocal (DVD)
Set this option to On only when a multi-channel karaoke DVD is playing.That way, the karaoke
channels on the disc mix into normal stereo sound.
channels on the disc mix into normal stereo sound.
Select On using the
and
buttons and press
OK
to confirm.
Dolby Digital
Bitstream
PCM
48KHz
On
Bitstream
DTS
MPEG
Sample Freq.
DRC
On
Vocal
Move
Select
AUDIO
DTH6300E_EN 28/05/04 18:48 Page 33