Tapco MIX.FX MIX10FXP Manual De Usuario
10
Rear Panel Features
2. POWER SWITCH
Press the top of this rocker switch to turn
on the mixer. The front panel power LED (22)
will glow with happiness, or at least it will if
you have the mixer plugged into a suitable
live AC mains supply.
will glow with happiness, or at least it will if
you have the mixer plugged into a suitable
live AC mains supply.
Press the bottom of this switch to turn off
the mixer, whenever you feel that this would
be a safe thing to do. Half-way through a
guitar solo by RagnaKX, self-proclaimed
Rock-Master-General from the Metal Planet
Tarquin-5 might not be such a good time.
be a safe thing to do. Half-way through a
guitar solo by RagnaKX, self-proclaimed
Rock-Master-General from the Metal Planet
Tarquin-5 might not be such a good time.
As a general guide, you should turn on
your mixer fi rst, before any external power
amplifi ers or powered speakers, and turn it
off last. This will reduce the possibility of any
turn-on, or turn-off thumps in your speakers.
amplifi ers or powered speakers, and turn it
off last. This will reduce the possibility of any
turn-on, or turn-off thumps in your speakers.
1. POWER CONNECTION
This jack accepts the supplied 3-prong IEC
AC power cord.
Before you plug the AC power
cord into the powered mixer, make
sure that the voltage of your unit
is the same voltage as your local
cord into the powered mixer, make
sure that the voltage of your unit
is the same voltage as your local
AC mains supply. Use only the power cord
supplied. Also, disconnecting the plug’s
ground pin is dangerous. Please don’t do it.
supplied. Also, disconnecting the plug’s
ground pin is dangerous. Please don’t do it.
1
2
3
4