Oricom C1000 1.8 GHz Manual De Usuario

Programming

You can program the ringer melody, dialing mode, Recall duration, user phone
number, network service number, and service centre number. You can also
reset all settings back to the factory defaults.

Start Programming

•

Press and hold PROGRAM key
during Standby.

(

icon is on.)

•

At any time, press and hold
CLEAR key to return to Standby.

Note:
1. In the programming mode selection, pressing and holding CLEAR key
   will abort all the changes and return to Standby.
2. Invalid entry during programming shall be ignored with a reject tone.
3. If there is an incoming call or paging from the base, programming will
be aborted.

Note:- If you have connected this product to an extension on your
PBX, you may need to dial a particular number (e.g. “9” or “0”) in
order to get dial tone for an outside line. You will need to dial this
each time you dial out.

Programming

Ringer Melody

•

Press and hold PROGRAM key
during Standby.

•

Press “1” to select ringer melody
programming.
(The current melody number shall

be displayed.)

•

Press PROGRAM key to select
melody programming.
(The current melody number
flashes.)

•

Press “1” to “5” keys to select
melody 1 to melody 5
respectively.
(The selected melody shall be
played once.)

•

Press PROGRAM key to confirm
the selection

•

Press CLEAR key to exit.