Orbit Manufacturing ORBIT 2000 Manual De Usuario
Page 2 - 3
Warranty
Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
2.3.1 Warranty is not applicable to the following conditions:
1/
Damage to the chrome laminating roller, rubberized feeding rollers, pressure rollers, pull rollers
and snapping rollers if caused by knives, razor blades or any other type of sharp tool.
and snapping rollers if caused by knives, razor blades or any other type of sharp tool.
2/
Damage to the chrome laminating roller, rubberized feeding rollers, pressure rollers, pull rollers
and snapping rollers if caused by:
and snapping rollers if caused by:
– any object falling into the working area of the machine.
– cleaning the rollers using solutions or material that could harm the surface. Refer to Section 8
Maintenance under cleaning the rollers for suitable cleaners.
Maintenance under cleaning the rollers for suitable cleaners.
3/
Damage to the Plexi-Glass panels or air regulator glass caused:
– mechanically
– by using cleaners that would harm the Plexi-Glass covers
4/
Damage to the exterior finish caused:
– mechanically
– by using cleaning solvents that would harm the finish. Refer to Section 8 Maintenance under
cleaning the exterior for suitable cleaners.
cleaning the exterior for suitable cleaners.
5/
Damage to the feeding head by incompetent handling or adjusting.
6/
Damage to the machine caused by:
– moving
– installation performed by any person other than a qualified GBC service technician
– Operation of the equipment by person(s) not fully trained in all aspects of the machine.