Oceanic ATOM 2.0 Manual De Usuario

131

To view that dive's Log during the Transition Period -

  Press and release the A button (< 2 seconds) to access the

Preview screen (Fig. 120).

  Press the S button  to view the Log 1 screen (Nitrogen

data).

  Press the S button again to view the Log 2 screen (Oxygen

data), if a Nitrox dive.

  Press the S button again to return to the NORM SURF

screen.

  The screen will revert to NORM SURF after 2 minutes if no

button is pressed.

Log Data will not be stored in the ATOM's memory until the 10

minute Transition Period on the surface is completed.

Once 10 minutes have elapsed, the Surface Interval time display

colon will stop flashing indicating that the Dive and Transition

Period are completed, and a subsequent descent will be  consid-

ered a new dive.  Operation will revert to the MAIN TIME

Display.

AFTER THE TRANSITION PERIOD

Once the Transition Period has ended, NORM MAIN SURF (Fig.

121) can be accessed from MAIN TIME by pressing the M

button 2 seconds.  You will then have full access to other NORM

DC modes (e.g., Plan, Fly, Sat, Log, Hist, Set, etc.).

Fig. 120 - LOG PREVIEW

(during Transition Period)

Fig. 121 - NORM MAIN SURF

 (after Transition Period)