Oceanic ATOM 2.0 Manual De Usuario

Depressing and holding the S button while the MINUTES

Set Point is flashing will scroll through the Set Points in 1

minute increments at a rate of 4 per second from :00 to :59

(min).

Pressing and releasing the A button momentarily (< 2

seconds) will save the MINUTES Set Point and/or advance

to the COUNTDOWN TIMER screen indicated by the

graphic OFF (flashing) in place of the graphic SEt.

Pressing and releasing the S button momentarily (< 2

seconds) will toggle from OFF to ON and Start the Timer

(Fig. 20).

Depressing and holding the M button for 2 seconds will

revert to the Local Default Watch Time screen.

If no button is pressed during a period of 2 minutes, the unit

will revert to the Local Default Watch Time screen.

CHRONOGRAPH (Stop Watch/Lap Timer)

Pressing and releasing the M button momentarily 3 times (<

2 seconds each) while the MAIN TIME screen is displayed

will access the CHRONOGRAPH displaying the elapsed

time if previously started or 0:00:00.00 (hr:min:sec.1/

100th sec), flashing (Fig. 21).

Pressing and releasing the S button momentarily (< 2

seconds) will start the TIMER which will begin counting up

from 0:00:00.00 to 99:59:59.99 (hr:min:sec.1/100th sec)

in increments of .01 (1/100th sec).

Fig. 21 - CHRONOGRAPH

Fig. 20 - CD TIMER

STARTED