Oceanic ATOM 2.0 Manual De Usuario

If a dive has been conducted within the past 24 hours, the SURF

MAIN screen for that Operating Mode (NORM, GAUG, or

FREE) will be displayed.

At any time while operating in Surface Modes, the ATOM will

enter Dive Mode upon descent to 5 FT (1.5 M).

During the 2 hour pre dive surface period, if the M button is

pressed to access other screens in the Watch Mode

sequence, Surface Mode must again be accessed prior to

the first dive of a series (if WET ACTIVATION is set OFF).

When WET ACTIVATION is set ON, the Wet Contacts will

activate the selected Dive Mode regardless of what Mode

the ATOM is operating in at the time of the descent.

The ATOM will enter POST DIVE SURFACE MODE following a

dive upon ascent to 4 FT (1.2 M). The Surface Interval Time

colon will flash during the first 10 minutes after a NORM/GAUG

dive (Fig. 34), or 1 minute after a FREE dive.

During the first 10 minutes after a dive, the SURF MAIN screen

for the Operating Mode selected prior to the dive (NORM,

GAUG, or FREE) remains on display as the Default SURF MAIN

screen. Main Watch Time can be viewed for 3 seconds during

that period by pressing and releasing the M button momentarily

(less than 2 seconds).

Fig. 34 - NORM SURFACE

MODE

(Post Dive Unit WET)