Oceanic ATOM 2.0 Manual De Usuario

SET TURN PRESSURE ALARM (for Transmitter 1 only)

Information includes (Fig. 53):

> Graphic TURN

> Set Point OFF or a numeric value, flashing.

> Symbol PSI (or M)

Pressing and releasing the S button momentarily (< 2

seconds) will step through the Set Points from OFF to 1000

to 3000 PSI (70 to 205 BAR) in 250 PSI (5 BAR)

increments.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 Set Points per second until it is

released.

Pressing and releasing the A button momentarily (< 2

seconds) will save the setting and/or advance to the SET

END PRESSURE ALARM screen with the Set Point flashing.

Pressing and releasing the A button momentarily and

repeatedly (< 2 seconds each time) will step through the

other SET A screens.

Depressing the A and S buttons simultaneously for 2

seconds will save the setting and revert back to the SET A

screen.

Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will

revert to the NORM or GAUG SURF MAIN screen.

Fig. 53 - SET TURN

The TURN Pressure

Alarm only applies

to TMT 1.