Oceanic ATOM 2.0 Manual De Usuario

SET TMT 1 information includes (Fig. 63):

> Graphics TMT1 and ON (or OFF) flashing.

> Set Point (Transmitter's Serial Number (Link Code).

Pressing and releasing the S button momentarily (< 2

seconds) will toggle between ON and OFF.

Pressing and releasing the A button momentarily (< 2

seconds) will accept the ON/OFF selection.

If OFF is selected, SET TMT 2 and TMT 3 will be bypassed

and the operation reverts to the SET U screen.

If ON is selected, the first (left) digit of the Code will flash.

Pressing and releasing the S button momentarily and

repeatedly (< 2 seconds each time) will increase the First

Digit from 0 to 9 in increments of 1.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 per second.

Pressing and releasing the A button (< 2 seconds) will

accept the First Digit of the Code and/or advance to the

Second Digit which will be flashing.

Pressing and releasing the S button shall increase the

Second Digit from 0 to 9 in increments of 1.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 per second.

Pressing and releasing the A button (< 2 seconds) will

accept the Second Digit of the Code and/or advance to the

Third Digit which will be flashing.

Fig. 63 - SET TMT 1

TMT 1 is the Default

Transmitter while on

the Surface, prior to

a dive and 10

minutes after a dive.