Oceanic ATOM 2.0 Manual De Usuario

SET TMT 2 (or BUD 1) information includes (Fig. 65):

> Graphics TMT2 (or BUD1) and ON (or OFF) flashing.

> Set Point (Transmitter's Serial Number (Link Code)).

Pressing and releasing the S button momentarily (< 2

seconds) will toggle between ON and OFF.

Pressing and releasing the A button momentarily (< 2

seconds) will accept the ON/OFF selection.

If OFF is selected, SET TMT 3 (or BUD 2) will be bypassed

and the operation reverts to the SET U screen.

If ON is selected, the first (left) digit of the Code will flash.

Pressing and releasing the S button momentarily and

repeatedly (< 2 seconds each time) will increase the First

Digit from 0 to 9 in increments of 1.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 per second.

Pressing and releasing the A button (< 2 seconds) will

accept the First Digit of the Code and/or advance to the

Second Digit which will be flashing.

Pressing and releasing the S button shall increase the

Second Digit from 0 to 9 in increments of 1.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 per second.

Pressing and releasing the A button (< 2 seconds) will

accept the Second Digit of the Code and/or advance to the

Third Digit which will be flashing.

Fig. 65 - SET TMT 2

If TMT 2-3 USE is set for

Buddy Presssure Check

If TMT 2-3 USE is set for Gas

Switching

- OR -