Oceanic Watch / Dive Computer GEO Manual De Usuario

110

NOTE:  During a dive, the CDT can be turned

OFF (stopped) and ON (started), but not Set.

SET FREE CDT STATUS DISPLAY (SURFACE ONLY),

information provided includes (Fig. 102) -

>  Graphic TIMR, solid.

>  Timer setting (min:sec) with the TIME icon, colon solid,

MINUTE Set Point flashing.

>  Graphic SEt, solid.

  Depressing/holding the S button while the MINUTE Set

Point is flashing will scroll through the Set Points at a rate

of 4 per second from 0: to 59: in 1 Minute (1:)

increments.

  Pressing/releasing the A button momentarily (< 2 seconds)

will save the MINUTE Set Point displayed and advance to

Set SECONDS with the Set Point flashing.

  Depressing/holding the S button while the SECONDS Set

Point is flashing will scroll through the Set Points at a rate

of 4 per second from :00 to :59 in 1 Second (:01)

increments.

  Pressing/releasing the A button momentarily (< 2 seconds)

will save the CDT Set Point indicated by the graphic OFF

flashing (Fig. 102) in place of the graphic SEt.

  Pressing/releasing the S button momentarily (< 2 seconds)

will toggle to ON and Start the CDT.

Fig. 101 - SET FREE

CDT

Fig. 102 - FREE CDT

SET/READY