Oceanic Watch / Dive Computer GEO Manual De Usuario

122

CARE AND CLEANING

Protect your GEO from shock, excessive temperatures, expo-

sure to chemicals, and tampering. Protect the lens against

scratches with a Instrument Lens Protector. Small scratches will

naturally disappear underwater.

Soak and rinse the GEO in fresh water at the end of each

day of diving, and check to ensure that the areas around

the Low Pressure (Depth) Sensor (Fig. 116a), PC Interface

Data Port (Fig. 116b), and Buttons are free of debris or

obstructions.

To dissolve salt crystals, use lukewarm water or a slightly

acidic bath (50% white vinegar/50% fresh water). After

removal from the bath, place the GEO under gently

running water and towel dry before storing.

Transport your GEO system cool, dry, and protected.

INSPECTIONS AND SERVICE

Your GEO should be inspected annually by an Authorized

Oceanic Dealer who will perform a factory prescribed function

check and inspection for damage or wear. To keep the 2 year

limited warranty in effect, this inspection must be completed

one year after purchase (+/- 30 days).

Oceanic recommends that you continue to have an inspection

performed every year to ensure it is working properly. The

costs of annual inspections are not covered under the terms of

the 2 year limited warranty.

Fig. 116 - CASE BACK