Novell ZENworks Endpoint Security Management 3.5 Manual De Usuario

ZENworks® ESM 3.5

Administrator’s Manual

126

•

Open - All network inbound and outbound traffic is allowed. Because all net-
work traffic is allowed your computer identity is visible for this port or port 
range. 

•

Closed - All inbound and outbound network traffic is blocked. Because all net-
work identification requests are blocked your computer identity is concealed 
for this port or port range. 

•

Stateful - All unsolicited inbound network traffic is blocked. All outbound net-
work traffic is allowed over this port or port range. 

Step 4: Enter the transport type: 

•

All (all port types listed below) 

•

Ether 

•

IP 

•

TCP 

•

UDP 

Step 5: Enter Ports and Port Ranges as either: 

•

Single ports 

•

A range of ports with the first port number, followed by a dash, and the last 
port number

Example: 1-100 would add all ports between 1 and 100 

www.iana.org

) for a 

complete Ports and transport types list.

Click Save. Repeat the above steps to create a new setting 

To associate an existing TCP/UDP port to this firewall setting:

Step 1: Select TCP/UDP Ports from the component tree and click the Associate Component 

button 

Step 2: Select the desired port(s) from the list 

Step 3: The default behavior setting may be re-defined 

Changing the settings in a shared component will affect ALL OTHER instances of this same component. 
Use the Show Usage command to view all other policies associated with this component.

Step 4: Click Save