Nortel Networks Video Gaming Accessories 553-3001-211 Manual De Usuario
NT8D02 and NTDK16 Digital Line cards
Page 529 of 894
Configuration
This section outlines the procedures for configuring the switches and jumpers
on the NT8D02 Digital Line card and configuring the system software to
properly recognize the card. Figure 104 on
on the NT8D02 Digital Line card and configuring the system software to
properly recognize the card. Figure 104 on
shows where the
switches and jumper blocks are located on this board.
Jumper and switch settings
The NT8D02 Digital Line card has no user-configurable jumpers or switches.
The card derives its address from its position in the backplane and reports that
information back to the Call Server through the LAN Link interface.
The card derives its address from its position in the backplane and reports that
information back to the Call Server through the LAN Link interface.
Software service changes
Voice and data ports are configured using the Meridian Digital Telephone
Administration program LD 11. See the Software Input/Output:
Administration (553-3001-311) for LD 11 service change instructions.
Administration program LD 11. See the Software Input/Output:
Administration (553-3001-311) for LD 11 service change instructions.