Nortel Networks Video Gaming Accessories 553-3001-211 Manual De Usuario

 NT8D14 Universal Trunk card

The optional applications, features, and signaling arrangements for each 
trunk are assigned through unique route and trunk data blocks. 

A universal trunk card unit can be configured as a paging trunk. Configure 
units as paging trunks in the Trunk Data Block program LD 14 and assign 
routes in the Route Data Block program LD 16. 

 shows a typical connection from customer-provided 

equipment to unit 0 on a universal trunk card that can be installed in slots 1, 
2, and 3 in an MG 1000S, and slots 7, 8, 9, and 10 in an MG 1000S. See 
Communication Server 1000S: Installation and Configuration 
(553-3031-210) for trunk wiring information.

A trunk unit can be connected to a music source. The audio source should 
provide an adjustable power output at 600 ohms. 

Configure units for music at the MUS or AWR prompts in the Trunk 
Administration program LD 14 and assign routes at the MRT prompt in the 
Route Data Block program LD 16. 

Music operation is similar to that of RAN in the continuous operation mode. 
Connect the unit tip and ring leads to the audio source and ground the CP line 
at the MDF. 

If the music source is equipped with contacts that close when music is online, 
use these contacts to provide a ground to the MB line; otherwise, ground the 
MB line at the MDF.