Nortel Networks Video Gaming Accessories 553-3001-211 Manual De Usuario
Page 90 of 894
Acceptance tests
Again, see “LD 38” in the Software Input/Output: Maintenance
(553-3001-511) for detailed information on using this command.
(553-3001-511) for detailed information on using this command.
7
End the session in LD 38:
****
****
End of Procedure
Digitone receiver cards
Procedure 3
Testing digitone receiver cards
Testing digitone receiver cards
Use this procedure to test a Digitone receiver (DTR) card, a DTR
daughterboard, or the DTR function on the NT8D18 Network/DTR card.
daughterboard, or the DTR function on the NT8D18 Network/DTR card.
Note: The DTR daughterboard connected to a QPC659 Dual Loop
Peripheral Buffer card cannot be assigned when the IPE shelf is used in
single loop mode.
Peripheral Buffer card cannot be assigned when the IPE shelf is used in
single loop mode.
1
Log into the system:
LOGI (password)
LOGI (password)
2
See if the Digitone receiver to be tested is disabled:
LD 34
STAT
LD 34
STAT
The system responds with the terminal number (TN), or numbers, of any
disabled Digitone receivers.
disabled Digitone receivers.
3
If the Digitone receiver is disabled, enable it:
ENLR l s c uloop, shelf, card, and unit numbers
ENLR l s c uloop, shelf, card, and unit numbers
4
Test the Digitone receiver:
DTR l s c uloop, shelf, card, and unit numbers
DTR l s c uloop, shelf, card, and unit numbers
If the system response is other than OK, see the Software Input/Output:
Administration (553-3001-311) to analyze the messages.
Administration (553-3001-311) to analyze the messages.
5
End the session in LD 34:
****
****
End of Procedure