Nlynx MinIT6000 Manual De Usuario

Selecting this option only allows the user to view a browser window that has been 
pointed at a specific web page.  The normal Internet browser address window is not 
displayed.  This mode is intended for company "Intranet" applications.  Once selected, to 
get out of Kiosk mode, select <CTRL> <ALT> <UP>. 

Note:  Changing modes forces the unit to be re-booted with all current client 
configurations being deleted.  

Display 

Use the Display properties window to configure the terminal's display screen. 

 

The following table discusses the functions of this properties sheet. 

1.  Use the pull-down list to select the terminal display resolution. 

2. Use 

Test resolution button to preview the resolution selected to verify that your 

monitor supports it. 

Click on the check box to enable the power saving features.  This is set by default. 

1.  Click on this ratio button to enable the screen saver.  This is set by default. 

2.  Choose from one of two screen saver patterns, Windows CE logo and blank screen. 

3.  Adjust the amount of time before the screen saver becomes active. 

4. Use 

the 

Test button to preview the Screen Saver image for 3 seconds. 

Select the hardware display color setting.  High Color (16 bit) is set by default.  If you 
encounter any display problem within an application, try choosing the 256 colors setting 
to see if it resolves the problem.  Selecting the True Color or Full color options will give 
you higher image quality but may slightly reduce system performance (speed).