Nikon DSR-1500A Manual De Usuario

43

Playback

C

h

apt

er 2   

Rec

o

rding

 a

nd Pla

y

b

a

c

k

Press the SET (YES) button to confirm the defined value.

The message “NOW SAVING...” is displayed on the monitor screen and 
“Saving...” is shown in the time counter display while the new setting is 
being saved in memory.

The new setting may be lost if you power off the unit during the saving 
operation. Wait until the saving operation is completed before powering the 
unit off.

If you want to discard the changed value
Press the MENU button instead of pressing the SET (YES) button to return 
to the menu display, then press the MENU button again to end the menu 
operation without saving the changed value into memory.

After the saving operation is completed, the monitor screen and time 
counter display return to the REPEAT FUNCTION setting display as 
shown in step 9.

To set point B, refer to steps 5 to 13. (Select “REPEAT END” in step 5, “B 

POINT” in step 7, and “B PRESET” in step 9.)

Press the MENU button to close the menu.

You can set any desired tape position as point A or B and cue up to the set point 
when required. To cue up to point A or B, holding down the g or G button in 
the menu control section, press the REW button in the tape transport control 
section.