Nikon DX-TL4516E Manual De Usuario

32

This is the screen for setting the clock of the recorder via PC.

1.  Select “Clock Setup” and left-click.

•  The “[Clock Setup]” screen appears.

. Set “Month,”  “Date,”  “Year,”  “Hour,”  “Min.,”  “Sec.,” 

“Time Zone” to the desired time.

. Select “set” and left-click.

3.  (When  setting  the  clock  using  “Synchronize  with 

PC’s clock” • • •)

 

When  you  want  the  clock  of  the  recorder  to  be 
synchronized with the PC clock, select “Synchronize 
with PC’s clock” and left-click.

•  The clock of the recorder is set to the same time 

as that of the PC.

•  When using this function on the timing that the 

year,  month,  day,  hour,  or  minute  is  changed, 
check the clock after synchronizing with the PC 
clock.

4.  (When setting the daylight saving time function • • •)

 

Select  “No”  when  you  do  not  want  to  use  the 
daylight saving time function.

 

Select “Auto” to use the daylight saving function.

•  When  selecting  “Auto,”  set  the  desired  time 

period  for  activating  the  daylight  saving  time 
function and then select “set.”

This is the screen for changing the SSL settings.

1.  Select the item to be changed in the “Access Mode 

Setup.”

•  Use SSL for Web Access:
  Sets the level of the encoding function (SSL).
  “No SSL”: Does not use the encoding function.
  “Menus only”: Uses the encoding function for the 

menus only.

  “Menus + Pictures”: Uses the encoding function 

for the menus and pictures.

•  SSL Port Settings:
  Sets the port number used for SSL communication.
•  Band-Width Limit:
  Controls the band width of the communication.

 When you use SSL, the following message appears. Se-

lect “Yes” and then continue the operation.

 When displaying live or playback picture while “Use SSL 

for Web Access” is set to “Menus only,” the following mes-
sage appears. Select “Yes” to display the live or playback 
picture.

 

In  this  case,  the  key-shaped  icon  which  shows  the 
encoded communication of the browser is not displayed, 
however, communication is carried out with encoded.

2.  Set  the  desired  setting  in  “New  Settings”  and  then 

select “change” and left-click.