NEC 2400 PX Manual De Usuario
NEAX2400 IPX Feature Programming Manual
Page 54
NDA-24297, Issue 1
A-60
Attendant-To-Attendant Calling
FCCS Programming (cont’d)
STEP 3:
ALGNN
- This command must be set to the NCN.
STEP 4:
ASATN
- This command must be set to the NCN. Assign identification numbers to the specific
Attendant Consoles.
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
in addition to ASYDL or ASYDN.