National Instruments Welding System 321645c-01 Manual De Usuario
Chapter 2
Function Reference — CTR_Pulse
NI-DAQ FRM for PC Compatibles
2-102
©
National Instruments Corporation
Pulse Generation Timing Considerations
Figure 2-9 shows pulse generation timing for both the TC toggled output and TC pulse output
cases. These signals are positive polarity output signals.
cases. These signals are positive polarity output signals.
Figure 2-9. Pulse Generation Timing
An uncertainty is associated with the delay period due to counter synchronization. Counting
starts on the first timebase edge after NI-DAQ applies the starting signal. The time between
receipt of the starting pulse and start of pulse generation can be between (delay) and
(delay + 1) units of the timebase in duration.
starts on the first timebase edge after NI-DAQ applies the starting signal. The time between
receipt of the starting pulse and start of pulse generation can be between (delay) and
(delay + 1) units of the timebase in duration.
0 < sync period < 1
1
Timebase
Starting
Signal
TC Toggle
Output
TC Pulse
Output
1
units = timebase period
- 1
1
1
1
delay
pulse_width
delay - 1
pulse_width - 1