National Instruments Welding System 321645c-01 Manual De Usuario
Chapter 2
Function Reference — DIG_Prt_Status
NI-DAQ FRM for PC Compatibles
2-186
©
National Instruments Corporation
DIG_Prt_Status
Format
status = DIG_Prt_Status (deviceNumber, port, handshakeStatus)
Purpose
Returns a status word indicating the handshake status of the specified port.
Parameters
Input
Output
Parameter Discussion
port is the digital I/O port number.
Range:
0 or 1 for the DIO-24 and Lab and 1200 Series devices.
2 or 3 for the AT-MIO-16D and AT-MIO-16DE-10.
0, 1, 3, 4, 6, 7, 9, and 10 for the DIO-96.
2 or 3 for the AT-MIO-16D and AT-MIO-16DE-10.
0, 1, 3, 4, 6, 7, 9, and 10 for the DIO-96.
handshakeStatus returns the handshake status of the port.
0:
A port is not available for reading from an input port or writing to an output port.
1:
A unidirectional port is available for reading from an input port or writing to an
output port.
output port.
2:
A bidirectional port is ready for reading.
3:
A bidirectional port is ready for writing.
4:
A bidirectional port is ready for reading and writing.
Note
C Programmers—handshakeStatus is a pass-by-reference parameter.
Name
Type
Description
deviceNumber
i16
assigned by configuration utility
port
i16
digital I/O port number
Name
Type
Description
handshakeStatus
i16
handshake status