National Instruments Welding System 321645c-01 Manual De Usuario

Chapter 2

Function Reference — RTSI_Clear

NI-DAQ FRM for PC Compatibles

2-286

©

 National Instruments Corporation

Disconnects all RTSI bus trigger lines from signals on the specified device.

RTSI_Clear

 clears all RTSI bus trigger line connections from the specified device, including 

a system clock signal connected through a call to 

RTSI_Clock

 (you can connect or 

disconnect other device system clocks only by changing jumpers on the devices). After you 
execute 

RTSI_Clear

, the device is neither driving signals onto any trigger line nor receiving 

signals from any trigger line. You can use this call to reset the device RTSI bus interface.

i16

assigned by configuration utility